PC Thermal Paste

Product details description:

The high thermal conductivity of 15.5W/m·k can effectively dissipate the heat of the computer quickly and efficiently. Compared with other traditional thermal conductive materials, the performance of BS-155 PC thermal paste will not dry out over time. It can be used for at least six years to ensure stable operation of the system.

Nuomi, a supplier of thermal paste in China, has BS-155 PC thermal paste packaging specifications of 4g and 8g, and other packaging of PC thermal paste can also be customized according to needs. BS-155 PC thermal paste is the 2025 version of Nuomi's formula, which has excellent component heat dissipation performance and stability that pushes the system to the limit.

Superior thermal conductivity: BS-155 PC thermal paste compound is composed of carbon particles, which has extremely high thermal conductivity. It can improve the heat generated by the computer, dissipate it quickly and efficiently, and is even suitable for overclocking. The thermal conductivity is 15.5W/m·K, which is much better than the thermal conductivity of traditional (usually 4-12W/m·K). It can quickly transfer the heat of the computer CPU/GPU to the radiator, reduce the operating temperature of the hardware, increase the computer running speed, and reduce the jamming.

Wide range of application: It is widely used in filling the gap between the processor and the radiator of electronic equipment such as desktop computers, notebooks, graphics cards, etc.

Durability and corrosion resistance: The high-quality formula avoids cracking and extends the service life. BS-155 PC thermal paste can be used for at least 6 years, and it has insulating and non-conductive components, avoiding leakage short circuits, etc., so that electronic equipment can operate safely for a long time.

Typical Properties:

Please follow the steps below when using:
Clean the surface: Use alcohol cotton pads to thoroughly remove the old silicone grease and dust on the contact surface of the processor and radiator to ensure that there is no residue.
Apply an appropriate amount: Take a pea-sized amount of BS-155 PC thermal paste and use a scraper to evenly cover the CPU core area using the "center point diffusion method". The recommended thickness is 0.13-0.2mm.
For the purpose of making full advantage of it, wait more than 15 minutes is advised then install the heat sink on the CPU.
Install the radiator‌: Press the radiator vertically and fix the screws. Use the balanced pressure to fully fill the micro gaps with thermal paste to avoid bubbles.
Please note that excessive application should be avoided. Unopened products should be stored in a cool and dry place. Please use as soon as possible after opening. Please be careful not to get into your eyes during operation.