High Thermal Conductivity Thermal Paste

This NM-960 high thermal conductivity thermal paste produced by Nuomi Thermal Paste Manufacturer can be widely used in computer CPU, GPU, SSD, etc., laptops, tablets, mobile phones, mining machines, 3D printers, sensors, coffee machines, refrigerators, heat pumps, medical equipment, curling irons, LED lights and other products. NM-960 high thermal conductivity thermal paste can fill the tiny gap between the chip and the heat sink, so that heat can be transferred from the chip to the heat sink more effectively, and then dissipated through cooling devices such as fans, thereby preventing the chip from overheating and causing performance degradation, failure or even damage.

NM-960 high thermal conductivity thermal paste parameter table:

This high thermal conductivity thermal paste is easy to use and easy to apply. First wipe the contact surface with an alcohol bag, then apply it evenly in a dot, cross, X shape, or with a scraper. When using it, you need to:

1. Choose the right thermal paste: Different scenarios and equipment have different requirements for thermal paste performance. For personal computer CPU and GPU heat dissipation, high thermal conductivity products are recommended, such as our SYY-166, which has a thermal conductivity of 16.6W/m・K. Industrial equipment may need a higher temperature resistant type. If you are not sure, please contact us!

2. Prevent pollution: When using, be sure to keep the thermal paste container and application tools clean to avoid impurities, otherwise it will reduce the thermal conductivity and even damage the equipment. At the same time, be careful not to let the thermal paste contact the eyes, mouth and other parts. Once in contact, rinse with plenty of water immediately and seek medical attention as soon as possible.

3. Regular inspection and replacement: Affected by factors such as high temperature and oxidation, the performance of thermal paste will decrease after long-term use, and regular inspection is required. If you find that the thermal paste has become dry, hardened, or has changed color significantly, you should clean it and reapply it in time. It is generally recommended to check and replace the thermal paste of the computer CPU every 1-2 years, and the specific time can be adjusted appropriately according to the frequency of use of the equipment and the environment.