Led Lights Thermal Paste

The NM-910 Led Lights Thermal Paste produced by Nuomi Thermal Paste Factory uses dimethyl silicone oil as the base oil, metal oxide as the filler, and is processed with additives through a certain process. NM-910 Led Lights Thermal Paste is used to fill the gap between aluminum substrate and radiator to make the heat conduction smoother and faster, which can effectively reduce the working temperature of LED lamps and extend their service life.

Led Lights Thermal Paste can help LED lamps improve heat dissipation efficiency, protect LED chips, enhance lamp stability, optimize lamp design and other functions. LED lamp thermal paste can be widely used in various lamps, such as LED ceiling lamps, LED spotlights, LED displays, LED mining lamps, LED explosion-proof lamps, automotive LED lamps, aviation LEDs, etc., medical LED lamps, etc.

NM-910 Led Lights Thermal Paste Other thermal pastes in the same series:

How to use NM-910 Led Lights Thermal Paste:

1. Clean the base surface: Before use, clean the surface of the contact objects such as the gap between aluminum substrate and radiator, remove rust, oil, dust and other pollutants, and ensure that the surface is clean and tidy to ensure that the thermal paste and the contact surface can fit well.

2. Apply paste: Open the lid of the NM-910 Led Lights Thermal Paste, open the seal, and then use the provided scraper to evenly apply the thermal paste to the parts that need heat dissipation, such as the connection between the LED lamp beads and the lamp board, and the contact surface between the driver chip and the heat sink. When applying, the thinner the paste layer, the better, but ensure uniform coverage to avoid uneven thickness or bubbles.

3. Install components: After applying, directly install the corresponding components in place, apply a little pressure to make the contact surface fit tightly, and let the thermal paste fully fill the gap. If there is squeezed thermal paste, wipe it with a cloth.