As a leading supplier of Bonding Epoxy Adhesive For Ceramic in China, Nuomi Chemical can provide professional advice and services according to customer needs. The standard packaging of NM-6010 Bonding Epoxy Adhesive For Ceramic is a single 50ML aluminum tube package, which supports flexible procurement of small batches, and provides 5L/10L industrial package customization services to meet production needs of different scales.
The curing time of NM-6010 Bonding Epoxy Adhesive For Ceramic will be affected by the temperature. The higher the temperature, the shorter the curing time. After curing, the colloid has good acid and alkali resistance, moisture and water resistance, oil resistance, dust resistance, heat resistance and atmospheric aging resistance, and has good electrical and physical properties such as insulation, compression resistance, and mild bonding. It has excellent bonding strength for encapsulation bonding between metals, ceramics, wood, glass and hard plastics, but is not suitable for bonding products with elastic or soft materials.
| Item | A/B Ratio | A Glue Color | B Glue Color | Usable Time | Curing Time |
| NM-6010 | 1:1 | colorless transparent | colorless transparent | 5 minutes | 10-15 minutes |
| Hardness（Shore D）≥70 | Water absorption（25℃ % 24 Hours）<0.15 |
| Compressive strength（kg/mm2） ≥50 | Shear strength (steel/steel) (kg/mm2) ≥13 |
| Tensile Strength (Steel/Steel) (kg/mm2) ≥22 | Dielectric constant (1KHZ) 3.8~4.2 |
| Volume resistance (25℃ Ohm-cm) ≥1.35 ×1015 | Surface resistance (25℃ Ohm) ≥1.2×1014 |
| Withstand voltage (25℃ Kv/mm) ≥16~18 | Temperature range –50℃-100℃ |
1. The parts to be bonded and sealed need to be kept dry and clean;
2. Take the amount according to the ratio, and stir the A and B agents thoroughly after mixing to avoid incomplete curing;
3. After stirring evenly, please inject the glue in time, and try to use up the mixed glue within the usable time;
4. During the curing process, please clean the containers and utensils used in time to prevent the glue from solidifying on the utensils and items.
Precautions for use: NM-6010 Bonding Epoxy Adhesive For Ceramic cures very quickly, please try to reduce the amount of glue dispensed at one time! The more glue is mixed together, the faster it reacts, the faster it cures, and it may release a lot of heat. Please pay attention to control the amount of glue you mix at one time, because due to the accelerated reaction, the usable time will also be shortened. Try to use up the mixed glue in a short time. Before using it in large quantities, please try it in a small amount first to master the use skills of the product to avoid mistakes.
Please note: A very small number of people will have mild skin allergies and mild itching and pain after long-term contact with glue. It is recommended to wear protective gloves when using it. If it sticks to your skin, please rinse it repeatedly with clean water immediately.
NM-6010 Bonding Epoxy Adhesive For Ceramic product needs to be sealed and stored in a cool and dry place. The shelf life is twelve months. If it is expired and tested, it can continue to be used.
Address
Building D, Yuanfen Industrial Zone, Bulong Road, Longhua District, Shenzhen, Guangdong, China
Tel
